Centrifugal Horizontal EPT Pums Introduction:
1. HS sequence slurry pump is developed for the continuous pumping of large abrasive, EPT slurries with small routine maintenance requirements. The sporting areas are produced of extremely chrome alloy or rubber. It will keep higher efficiency in excess of the wear life of its parts.
two. The metallic damp areas and rubber ones can be interchangeable for handling different liquids or slurries.
three. HS slurry pumps are offered in dimensions ranging from one inch to eighteen inch discharge and feature high efficiency overall performance capable of movement rates from 10.eight to 5400 m sup3/h and heads up to a hundred twenty five meters for large head models.
4. EPTurethane Parts can be interchangeable with rubber kinds.
Characteristics:
one. Cylindrical construction of bearing assembly: convenient to modify the area between impeller and JCEP liner
and can beremoved entirely
2. Interchangeable anti-abrasive damp parts made of high-chrome alloys
3. Casing halves of ductile iron with external reinforcing ribs provide substantial running stress abilities
and an extra measure of safety.
4. The discharge department can be oriEPTTd to any eigEPTT positions at the interval of 45 levels
5. Different EPT types: DC(immediate link), V-belt EPT, EPT box EPTT, EPT couplings, VFD,
SCR control, and so on
six. The shaft seal uses the EPTT seal, expeller seal and mechanical seal
Typical Software:
| #8226 Mineral processing | #8226 EPT | #8226 EPTT Washery | #8226 Cyclone feeds |
| #8226 Bentonite | #8226 EPTT slurry | #8226 EPTEPTTng | #8226 Mill grinding |
| #8226 Ash hXiHu (West EPT) Dis.Hu (West EPT) Dis. | #8226 Tunnel | #8226 Squander sludge | #8226 Coarse sand |
| #8226 Lime mud | #8226 Phosphoric acid | #8226 EPTT | #8226 EPTT |
| #8226 Alumina JCEP | #8226 EPTT Plant | #8226 Potash FerEPTTzer Plant | #8226 Other EPTT |
| #8226 Iron ore sand | #8226 JCEP Concentration | #8226 EPT EPT | #8226Molybdenum |
| Product | Max EPTT (Kw) |
Inlet amp Outlet size (inch) | EPT for Use Parts | Movement Fee (Q) | EPT (H) meter |
Speed (RPM) |
EPTTeller Dia. (mm) |
|
| m sup3/hr | l/s | |||||||
| 25HS-B | fifteen | 1.five/one | M | twelve.six~28.eight | three.five~8 | 6~68 | 1200~3800 | 152 |
| R | 10.8~twenty five.two | three~seven | 7~fifty two | 1400~3400 | 152 | |||
| 40HS-B | fifteen | two/1.five | M | 32.four~72 | nine~20 | six~fifty eight | 1200~3200 | 184 |
| R | 25.two~fifty four | 7~fifteen | five.5~41 | 1000~2600 | 178 | |||
| 50HS-C | thirty | three/2 | M | 39.six~86.4 | eleven~24 | 12~sixty four | 1300~2700 | 214 |
| R | 36~seventy five.six | 10~21 | 13~forty six | 1300~2300 | 213 | |||
| 75HS-C | thirty | 4/three | M | 86.4~198 | 24~fifty five | nine~52 | one thousand~2200 | 245 |
| R | seventy nine.2~a hundred and eighty | 22~fifty | 5~34.5 | 800~1800 | 245 | |||
| 100HS-D | sixty | six/4 | M | 162~360 | 40~a hundred | twelve~fifty six | 800~1550 | 365 |
| R | 144~324 | forty~ninety | 12~45 | 800~1350 | 365 | |||
| 150HS-E | one hundred twenty | eight/six | M | 360~828 | a hundred~230 | ten~61 | five hundred~1140 | 510 |
| R | 324~720 | 90~200 | 7~49 | four hundred~one thousand | 510 | |||
| 200MS-E | one hundred twenty | 10/8 | M | 666~1440 | 185~400 | 14~sixty | 600~1100 | 549 |
| 200HS-ST | 560 | ten/eight | M | 612~1368 | a hundred and seventy~380 | eleven~sixty one | four hundred~850 | 686 |
| R | 540~1188 | 150~330 | 12~fifty | 400~750 | 686 | |||
| 250HS-ST | 560 | twelve/ten | M | 936~1980 | 260~550 | 7~sixty eight | three hundred~800 | 762 |
| R | 720~1620 | 200~450 | seven~45 | 300~650 | 762 | |||
| 300HS-TU | 560 | 14/12 | M | 1260~2772 | 350~770 | thirteen~sixty three | three hundred~600 | 965 |
| R | 1152~2520 | 320~700 | thirteen~44 | 300~500 | 965 | |||
| 350HS-TU | 1200 | sixteen/fourteen | M | 1368~3060 | 380~850 | eleven~63 | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/eighteen | M | 2520~5400 | seven hundred~1500 | thirteen~fifty seven | two hundred~400 | 1370 |
| 25HHS-C | 30 | one.five/1 | M | 16.2~34.2 | four.five~nine.five | twenty five~92 | 1400~2200 | 330 |
| 50HHS-D | sixty | 3/two | M | 68.four~136.8 | 19~38 | 25~87 | 850~1400 | 457 |
| 75HHS-E | a hundred and twenty | 4/three | M | 126~252 | 35~70 | 12~ninety seven | 600~1400 | 508 |
| 100HHS-E | a hundred and twenty | six/four | M | 324~720 | ninety~200 | thirty~118 | 600~a thousand | 711 |
| 150HHS-S | 560 | eight/six | M | 468-1008 | one hundred thirty~280 | 20~ninety four | five hundred~one thousand | 711 |
For the substance of donning parts,
quotM quot = metallic, extremely chromium alloy quotR quot = anti-abrasive rubber
Welcome to make contact with us 7×24 for a lot more details.
Any of your inquiry or advice will get our prompt attention and reaction !
