worm reduction

Our regular 700 Series – the heart of Ever-Power swiftness reducer product line – has been serving industry reliably for over a decade. Its proven modular style has set the sector standard for efficiency and may be the most imitated item in today’s worm gear acceleration reducer market. But why settle for a knock-off when you’re able to have the initial – from Ever-Power.
Specifications
11 basic one reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting versatility permits installation in virtually any position.
Housings are straddle-milled, top and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for optimum durability, and also greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings are available in our eCatalog.
Ever-Power worm gearboxes have earned a reputation to be an industry benchmark worldwide. Our success came from our relentless drive for quality with state-of-the-artwork technology, all and will be offering worm gearboxes are affordable prices. High flexibility accorded through a wide choice of mounting choices, shaft configurations and engine interfaces, makes the Ever-Power worm gearbox the default choice for the industry. The helical-worm and the double-worm version, with or without the torque limiter, add up to the advantage, creating a highly versatile drive system.
Ever-Power Worm gearboxes provide high torque with low acceleration gear ratio. Being basic and compact in design, these gears can achieve higher gear ratio than the helical gears. These worm reduction gears having screw type characteristics are similar to helical gears, but its helix position is typically comparatively bigger) and its own body is normally quite lengthy in the axial path. The gears in these gearboxes could be correct or left-handed depending upon the purpose.
Mounting choice include universal housing, part flanges, foot (horizontal and vertical), shaft mounted with torque arm. Obtainable in Solid shafts (solitary or double), with torque arm or torque limiter.
Worm reduction gears features
Principles
A worm gear is a type of interlocking gear made up of a worm shaft and worm wheel. The worm is usually shaped like a screw and the worm wheel is certainly a type of gear machined to possess a tooth profile with the same configuration.
The operation of a worm gear is similar with that of a bolt and nut. The principle is equivalent to a nut that is fixed so that it cannot rotate and for that reason progresses in the axial path when the bolt is turned.
The look of a worm gear is thought of through the relationship between your rack and spur gear on the center plane of the worm wheel.
Features
High reduction ratio One rotation of the worm rotates the worm wheel by one tooth. Because of this, in a 1 speed reduction gears, the wheel could be manufactured so that it will be rotated 1/60 (1/120 in unique applications).
Orthogonal shaft The shafts are aligned orthogonally because of the structure. This feature can help you layout the turning tranny direction at the right angle.
The arbitrariness of the rotation direction The screw direction of the worm could be clockwise or counterclockwise (generally clockwise). It is possible to change the rotation path of the worm wheel by changing the screw path.
A multitude of shaft layouts The wide selection of shaft layouts is among the features of interlocking gears.For example, right shaft output, left shaft output, dual shaft input and dual shaft output, etc., combine for a total of 14 types (Body 2) and, if attachment orientations are included, you’ll be able to pick from over 40 layouts.
Low noise, low vibration The interlocking of the worm and worm wheel is characteristic because the contact is usually linear and the relative slide is great. In comparison with rolling power transmission, noise and vibration are really low. For this reason, this technology can be used to drive medical apparatus, elevators and escalators, etc.
The principal specifications of worm reduction gears
MA Series(Small)
Center distance(mm) 32,40
Reduction ratio 10,20,30,40,50,60
Input capacity(kW) 0.1～1(at an input of 1800 rpm)
Output torque(N・m) 20～66
Input speed(rpm) 0～1800
MA Series(Medium)
Center distance(mm) 50,63,80,100,125,140,160
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.4～30(at an input of 1800 rpm)
Output torque(N・m) 900～3570
Input speed(rpm) 0～1800
S Series
Center distance(mm) 50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.3～255(at an input of 1800 rpm)
Output torque(N・m) 50～56600
Input speed(rpm) 0～1800
Key points when selecting a worm reduction gears
Selection
When selecting a worm reduction gears, the procedures for selecting the correct gear are described in the manufacturer catalogs and the series and models ought to be selected according to those procedures. Particular care ought to be taken in essential areas such as for example selecting the load index, calculating the overhang load and examining the heat rated capability from the manufacturer.
Cautions during use
When using a worm reduction gears, heat produced through the initial period of use is high and running-in operation at 1/4, 1/2 and 3/4 of rated torque for eight hour periods is key to sufficiently attaining the performance of the worm reduction gears.
Maintenance and inspection
After completing running-in procedure (approximately 50 hours), it’s important to change the lubricating oil and also to change the lubricating oil after that about 1 time per year according to the operation manual offered by the manufacturer.
Product Description
The Worm Reduction Gear Box is provided by our company is of supreme quality. Our products are created through the use of premium quality materials and enhance technology at our vendors end. They are widely used in a variety of sectors. Our items are often available at a very low market prices.
Motor Mount Frame Options
TEC Motors, worm reduction gearbox.
Option A-160 B5 Body, Flange Mount.
Choice B-132 B14 Frame, Face Mount.
Option C-100/112 B5 Frame, Flange Install.
High efficiency and safe operation. High load capacity and overload functions. Result Torque = (Power (kW) x 9550 (Constant))/ Gearbox result speed (rpm).
Higher ratios available on request reliant on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
DESCRIPTION
Wormgears of the VF series are milestones for the sector worldwide. They succeeded in combining uncompromising quality with stateoftheart technology amd renown cost effectiveness.Absolute flexibility is distributed by the wide selection of several installation options, shaft configurations and electric motor interface, all offered as standard. The helicalworm and the doubleworm version, with or without the torque limiter, also add up, creating a highly versatile drive system.
ADDITIONAL INFORMATION
AMP
0.42 A
EFFICIENCY
84%
HP
0.12
KW
0.09
RATIO
7
RPM
200
TEMPERATURE RATING
20 degree C TO 80 degree C
TORQUE
4 Nm
HSN
8483.40.00
WARRANTY PERIOD
12 Months
The worm reduction gears can be found in two series: X and H.
The series X, having a worm and worm wheel set, comes in versions XA with shaft and XF-XC with mounting provisions for motor.
Version XF (bell casing + coupling) offers great versatility to suit a broad range of applications and higher efficiency than the compact range XC, where in fact the emphasis is on space effectiveness.
Series H supplies the same features since series X with an extra plus: a spur gear pre-stage at the insight end provides higher performance and a broader range of ratios compared to the X series.
Body sizes 110 and 90 feature a cast-iron casing cast enbloc, whereas smaller sizes use die-cast aluminium housings. The worm shaft is produced from casehardened and hardened alloy steel and ground-finished.
The worm wheel has a cast iron hub with cast bronze insert. Hollow result shaft is supplied as standard.
Broad range of possibilities:
second input, result flange, single or dual extension result shaft, torque limiter with through cable, torque arm.