Leaf Chain

Leaf chains consist of pins and plates only and therefore are increased in strength than roller chains. They are really ideal for duties like hoisting and pulling. Leaf chains conform to ANSI and have two types: AL and BL.
AL variety
For the use that static load is applied with tiny concern of wearing.
BL form
For the use that wear resistance is required given that effect load is applied.
Variety of leaf chains
The chain size is chosen according towards the following formula:
Acting tension?¨¢Service factor¡§QMaximum allowable stress Notes:
one. Acting stress consists of the dead weight from the chain, the weight from the attachments and inertia.
2. Should the chain speed exceeds thirty m/min, use a roller chain.
Minimum sheave diameter: S.D = Chain pitch?¨¢5
Minimal width between flanges: L = Overall length of pin?¨¢1.05
?If connecting pins are supplied: L¡§R2L1?¨¢1.05
F.D = S.D + Maximum hyperlink plate height (H) Note:?If dimension H exceeds 25.4,
F.D = S.D + 25.four could be adopted because the minimum flange outer diameter.
Periodical inspection and directions for replacement
Be sure to carry out periodical inspection and lubrication to verify safety and prolong chain lifestyle. Problems and guidelines for answer are outlined from the following.
Trouble:Circumferential wear of plate
Alternative:Replace the chain if dress in loss turns into 5 percent of H.
Problem:Oblique put on of plate and pin head
Remedy:Align the unit.
Trouble:Abnormal protrusion or rotation of pin head
Answer:Exchange the chain Lubricate and reduce overload.
Challenge:Wear elongation
Solution:Change the chain when its length gets one.03L. Note: Dress in elongation of a
chain lowers its tensile strength.
Put on elongation of 3% lowers the tensile power by 18 percent.
The dress in life of chain is usually enhanced by lubrication. Change the chain.
Dilemma:Cracked plate (one)Crack: From your hole of the link plate toward the end of your link plate in the path perpendicular to stress route.
Remedy:Exchange the chain having a chain of higher highest allowable tension, or reduce the load or dynamic (shock) load.
Challenge:Cracked plate (2)Crack: In an oblique path towards stress path.
Resolution:Change the chain, and protect from corrosive situations.
Problem:Broken plate(by high stress)
Answer:Substitute the chain, and get rid of the result in of overload.
Trouble:Enlarged plate hole
Remedy:Substitute the chain, and eradicate the bring about of overload.
Challenge:Corrosion of pit
Answer:Substitute the chain, and protect from corrosive conditions.


As one of leading jaw coupling manufacturers, suppliers and exporters of mechanical products, We offer jaw coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of jaw coupling

Recent Posts