DUMP TRAILER Power UNIT-DOUBLE ACTING
This power unit includes a energy up power down circuit with load holding on both A & B ports. A strain compensatred flow manage might be additional to circuit to control the decent pace of your cylinder.
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean every one of the hydraulic elements concerned in advance of installation of the electrical power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which ought to also be clean and cost-free of impurities. N46 hydraulic oil is suggested.
four. The energy unit must be mounted horizontally.
five. Check the oil degree during the tank following the first working with the electrical power unit.
6. Oil altering is needed just after the preliminary one hundred operation hrs, afterwards once just about every 3000 hrs.
DUMP TRAILER Energy UNIT- SINGLE ACTING
This energy unit features a power up gravity down circuit. Commence the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve may be supplied if essential. Also a stress compen sated flow manage is often additional to your circuit to manage the descent pace in the cylinder.
Remark: Please check with our product sales engineer for your diverse pump displacement, motor electrical power or tank capability.
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean all the hydraulic parts concerned before set up of the power unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst,which need to also be clean and free of charge of impurities.N46 hydraulic oil is advised.
four. The energy unit should be mounted horizontally.
five. Check the oil degree in the tank after the initial operating on the electrical power unit.
6. Oil altering is needed following the original 100 operation hrs, afterwards the moment each 3000 hours.