Any injury about the teeth surfaces of the sprocket diminishes the daily life on the conveyor chain.
With traditional sprockets, significantly worn sprocket teeth were repaired by teeth padding or even the entire sprocket was replaced. In either situation, repair was pricey and with teeth padding, accuracy was impaired. We created new sprockets with detachable teeth for independent replacement. This sprocket is extremely rated by our buyers to the dramatic financial savings in value and time.
Framework
The teeth may be replaced by two approaches: individual tooth replacement or sectional teeth replacement.
The bolts and nuts employed for mounting the teeth on for the sprocket are spot-welded to avoid loosening.
The respective structures are illustrated on the 
correct.
The above photograph as well as the top correct illustration present a sprocket for individual tooth replacement. Since the joint face involving the replaced teeth as well as sprocket is formed in the one of a kind arc, the bonding accuracy is substantial plus the sprocket power is enhanced. Additionally, since the load acting about the mounting bolts is decreased, there is certainly significantly less probability of loosening. This sprocket development is patented.
You will discover two kinds of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are utilised for huge sprockets receiving hefty loads and welded sheet steel hubs for other applications.
DK Detachable Teeth Sprockets
Tags: