Materials Managing Energy UNIT 2
Standard Description
This power unit functions electrical power up gravity down circuit. Activate the commence solenoid to start out the motor to lift the machine. The lowing movement is activated from the solenoid valve with the decreasing velocity managed through the strain compensated flow management valve. Goods of this series could be widely used in the sector of logistic products like fork lift, mini lift table, etc.
Particular Notes
one. The duty of this energy unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean every one of the hydraulic parts concerned just before mounting the energy unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst,which should also be clean and free of impurities, N46 hydraulic oil is proposed .
4. Oil shifting is needed immediately after the preliminary one hundred operation hrs,afterwards the moment just about every 3000 hours.
five. The energy unit must be mounted horizontally.
Materials Handling Electrical power UNIT one
Common Description
This electrical power unit is built for the fork lift market, consisting of remarkably efficient gear pump, DC motor, guide increase and lower valve, tank, ect. The up and down motion are controlled by the lever with the manual release valve, that’s outfitted with an electric switch to activate the motor. The lowing velocity is controlled through the pressure compensated flow handle valve.
Special Notes
one. The duty of this energy unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean the many hydraulic components concerned just before installation of the energy unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst, which must also be clean and free of charge of impurities, N46 hydraulic oil is recommended .
4. Oil modifying is needed soon after the 
initial 100 operation hours, afterwards as soon as each 3000 hrs.
five. The power unit proven is built to be mounted horizontally.