We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/
Gear hose clamp
Worm drive clamps with embossed perforations are resistant to rust and acids, and
based on DIN3017. Their non-magnetic properties and minimal space requirements make them especially suitable for securing magnetic sensors, particularly on pneumatic cylinders.
Features
·Group 756&758 the joint was eccentric
·Embossed clamp strip-not perforated
·Compact design-minimal space requirement
·Reusable
·Cylindrical screw head with screwdriver slot
·Fast, simple and safe installation
Material (W1, W2,W2B, W3 &W4 series)
–Group 756 with band width 7.5mm& 9mm, group 758 with band width 12mm
| Band width 7.5mm & 9mm | ||||
| Specification | Clamp range | Thickness | Width | |
| D(mm) | Min(mm) | Max(mm) | T(mm) | W(mm) |
| 12 | 8 | 12 | 0.6 | 7.5 |
| 16 | 10 | 16 | 0.6 | 7.5 |
| 18 | 12 | 18 | 0.6 | 7.5 |
| 16 | 8 | 16 | 0.6 | 9 |
| 20 | 12 | 20 | 0.6 | 9 |
| 22 | 12 | 22 | 0.7 | 9 |
| 25 | 16 | 25 | 0.7 | 9 |
| 27 | 16 | 27 | 0.7 | 9 |
| 32 | 20 | 32 | 0.7 | 9 |
| 35 | 23 | 35 | 0.7 | 9 |
| 40 | 25 | 40 | 0.7 | 9 |
| 45 | 30 | 45 | 0.7 | 9 |
| 50 | 32 | 50 | 0.7 | 9 |
| 60 | 40 | 60 | 0.7 | 9 |
| 70 | 50 | 70 | 0.7 | 9 |
| 80 | 60 | 80 | 0.7 | 9 |
| 90 | 70 | 90 | 0.7 | 9 |
| 100 | 80 | 100 | 0.7 | 9 |
| 110 | 90 | 110 | 0.7 | 9 |
| 120 | 100 | 120 | 0.7 | 9 |
| 130 | 110 | 130 | 0.7 | 9 |
| 140 | 120 | 140 | 0.7 | 9 |
| 150 | 130 | 150 | 0.7 | 9 |
| 160 | 140 | 160 | 0.7 | 9 |
| 170 | 150 | 170 | 0.7 | 9 |
| 180 | 160 | 180 | 0.7 | 9 |
| 190 | 170 | 190 | 0.7 | 9 |
| 200 | 180 | 200 | 0.7 | 9 |
| Band width 12mm | ||||
| Specification | Clamp range | Thickness | Width | |
| D(mm) | Min(mm) | Max(mm)] | T(mm) | W(mm) |
| 27 | 16 | 27 | 0.8 | 12 |
| 32 | 20 | 32 | 0.8 | 12 |
| 35 | 23 | 35 | 0.8 | 12 |
| 45 | 30 | 45 | 0.8 | 12 |
| 50 | 32 | 50 | 0.8 | 12 |
| 60 | 40 | 60 | 0.8 | 12 |
| 70 | 50 | 70 | 0.8 | 12 |
| 80 | 60 | 80 | 0.8 | 12 |
| 90 | 70 | 90 | 0.8 | 12 |
| 100 | 80 | 100 | 0.8 | 12 |
| 110 | 90 | 110 | 0.8 | 12 |
| 120 | 100 | 120 | 0.8 | 12 |
| 130 | 110 | 130 | 0.8 | 12 |
| 140 | 120 | 140 | 0.8 | 12 |
| 150 | 130 | 150 | 0.8 | 12 |
| 160 | 140 | 160 | 0.8 | 12 |
| 170 | 150 | 170 | 0.8 | 12 |
| 180 | 160 | 180 | 0.8 | 12 |
| 180 | 170 | 190 | 0.8 | 12 |
| 230 | 210 | 230 | 0.8 | 12 |
| 260 | 240 | 260 | 0.8 | 12 |
| 270 | 250 | 270 | 0.8 | 12 |
| 290 | 270 | 290 | 0.8 | 12 |
| 320 | 300 | 320 | 0.8 | 12 |
| 370 | 350 | 370 | 0.8 | 12 |
| 390 | 370 | 390 | 0.8 | 12 |
/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.
/
