We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/
Jacton ball screw jack 5 ton load capacity required input torque to approximately one-third the torque required for the 5 ton machine screw jack. The ball screw sizes 40×10, worm gear ratios 6:1 and 24:1. Note: without self-locking, require a brake or other external locking device to hold position.
Ball Screw Jack 5 Ton Load Capacity Features:
1. Upright or inverted units with maximum static load capacity 5 ton in tension or compression.
2. Required input torque to approximately one-third the torque required for the 5 ton machine screw jack. They also require a brake motor or external locking device to hold position.
3. Ball screw sizes 40mm diameter, lead 10mm (single start ball screw and ball nut).
4. Worm gear set gear ratios 6:1 and 24:1 ratios.
5. There are no standard travel lengths and each ball screw jack is built to specification.
6. Standard configurations: upright or inverted 5 ton translating ball screw jacks, upright or inverted 5 ton translating with anti-rotation ball screw jacks, and upright or inverted 5 ton rotating ball screw jacks.
7. They can be driven by different motors: EPT motors, dc motors, gear motors, as well as hydraulic or pneumatic motors. Also they can be driven by hand wheels or cranks or with any other kinds of transmission.
8. Can be applied singularly or in groups as a synchronous lifting system which properly connected with connecting shafts, couplings or universal joints, and bevel gearboxes.
Ball screw jack 5 ton load capacity main components with international standard materials: The main components are ball screw and nut made from hardened alloy steel with hardened bearing balls carrying the load between nut and screw. Worm input shaft in case-hardened steel C45. High strength aluminum bronze worm gears (drive sleeve). Housing of nodular cast iron.
Ball Screw Jack 5 Ton Load Capacity Specifications
1. Conditions: within 30% running time/30 minutes, 20 °C ambient temperature.
2. Note: Number of synchronizing jacks which can be connected on the same line is limited by input shaft strength. Refer to the maximum allowable input shaft torque on the above table.
3. Relative humidity: 85% or less (no dew condensation).
4. Operating ambient atmosphere: Indoor Environment (Indoor room where rain and water cannot enter. Dust volume should be normal).
5. Selection of screw jacks using above figures should only be carried out in consultation with Jacton engineers.
Ball Screw Jack 5 Ton Load Capacity Dimension Drawing
Find out ball screw jack 5 ton load capacity front view, side view and top view assembly drawings. About 2D Autocad dwg, dxf assembly drawings, and 3D stp, step, model, igs, prt or catpart assembly drawings, please contact us directly.
Packing Pictures & Shipping
Shipping:
1. EPT freight: seaport to seaport, price terms CIF, FOB, EXW, CFR etc.
2. Air freight: airport to airport, price terms EXW, CRF etc.
3. Air Express: DHL, FEDEX, UPS, TNT.
Packaging:
EPT Exporting Plywood Cases (International Exporting Standard Wooden Material with Free Fumigation)
Our Advantages
1. Focus on sales and manufacturing screw jack, bevel gearbox, lifting system, 3-phase ac linear actuator, gearmotor and speed reducer.
2. Custom design available, OEM service available, Free engineering advice, Free quotes available and Customer label available.
3. Export percentage: America 25%, Europe 22.5%, Asia 19.5%, Oceania 10%, Africa 8%; Domestic 15%.
4. Internationl sales have professional knowledge and skills on these products and service. They have enough ability to solve the basic technical questions of screw jack, bevel gearbox, lifting system, 3-phase ac linear actuator, gearmotor and speed reducer.
5. 100% correct production and processing. There are the detailed part number details and drawing dimensions for clients reference. We start to manufacture the clients orders after get the their drawing dimensions approval.
6. 100% quality assured with double quality inspections. The 1st time, the quality inspection by QC from processing to finished products. The 2nd time, the quality inspection by sales themself. Before packing, the orders correcsponding sales who must inspect the finished products following the clients approval drawings.
7. 100% safety transportation. Whatever EPT or air shipment, the packages are made of the strongest exporting plywood cases. Inner packing with epe foams to prevent products swaying. Outer packing with iron sheets and fasteners to fasten the complete one package.
8. Fast delivery time: standard products within 15 working days; non-standard products with about 15-25 working days.
Our Customers’ Countries
1. American Countries: United States, Mexico, Canada, Chile, Xihu (West Lake) Dis.via, Brazil, Colombia, Dominican Republic, Honduras, Costa Rica, Panama, Puerto Rico, Jamaica, Trinidad and Tobago, Aruba, Argentina, Peru, Venezuela.
2. European Countries: Russia, Germany, Turkey, France, United Kingdom, Italy, Spain, Ukraine, Poland, Romania, Netherlands, Belgium, Greece, Czech Republic, Portugal, Sweden, Hungary, Belarus, Austria, Switzerland, Bulgaria, Denmark, Finland, Slovakia, Norway, Ireland, Croatia, Georgia, Armenia, Lithuania, Slovenia, Estonia, Cyprus, Luxembourg, Iceland.
3. Asian Countries: Malaysia, Indonesia, Singapore, Pakistan, Philippines, Vietnam, United Arab Emirates, Thailand, Saudi Arabia, Iran, Turkey, India, Nepal, Yemen, ZheJiang , Sri Lanka, Israel, Jordan, Kuwait, Qatar.
4. Oceanian Countries: Australia, New Zealand, Fiji.
5. African Countries: South Africa, Egypt, Ethiopia, Nigeria, Kenya, Tanzania.
Finished Projects
1. South Africa railway projects.
2. Mexico, Brazil and United States bolted tank lifting projects.
3. Australia and France theater stage lifting platform projects.
4. Russia, Australia and United States hydro projects or power station projects.
5. United Arab Emirates and Pakistan airport projects.
6. Spain and Canada solar energy projects.
7. Malaysia and United States satellite dish projects.
8. United States, Netherlands, Thailand and Indonesia food industries.
9. Iran steel industries production lines.
10. United Kingdom and Thailand continuous PU panel production lines etc.
Contact Information
Xihu (West Lake) Dis. EPT Jacton Industry Co.,Ltd
Contact: Mr. Warren Lee
Website 1: http://
Website 2: http://
Xihu (West Lake) Dis. EPT Jacton Industry Co.,Ltd (VAT number: 9144190007026567X3)
Building C, No. 3078, EPT Road, EPT An Community, Chang An, 523880, HangZhou, ZheJiang , China
Tel: +86-769-81585810 Fax: 0086-571-88220971: +86-769-81585852 Cellphone: +86-135-3283571
Screw Jack | Bevel Gearbox | Lifting System | System Accessories | 3-Phase AC Linear Actuator | Gearmotor and Speed Reducer | Download Catalogues | Industries Solutions | Technical Help | Online Inquiry | Custom Design Available | Free Engineering Advice | Free Quotes Available
/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.
/
